Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Freezer Features
To avoid property damage, confirm shelf is secure
before replacing items on shelf.
Automatic Ice Maker
• Confirm ice bucket is in place and ice maker arm is
down.
A.
Off position
Ice maker operation
• After freezer section reaches normal temperature, ice
maker fills with water and begins operating. Allow
24–48 hours after installation before first harvest of ice.
Ice maker produces 7– 9 harvests of ice in a 24-hour
period under ideal conditions.
• After ice is formed, ice maker drops ice cubes into
ice storage bucket. During ice production, ice maker
arm raises and lowers. When ice storage bucket is full,
ice maker arm turns ice maker off. Discard first 3
harvests of ice after initially connecting refrigerator to
household water supply and after extended periods of
nonuse.
• Stop ice production by raising ice maker arm. A
definite click is heard when proper position is
reached. Ice maker arm will remain in off position until
pushed down.
To avoid damage to ice maker, observe the following:
• Do not force ice maker arm down or up.
• Do not place or store anything in ice storage bucket.
®
Stor-Mor
System
Wire baskets slide out for easy access of items in back
and wire shelves (some models) can be rearranged to
meet individual storage needs.
• Remove baskets by pulling out and lifting. Replace
baskets by placing baskets on side rails, slide baskets
right and back until round knob is behind stop on rail.
Caution
(some models)
B
B.
On position
Caution
• Remove shelf by lifting right side of shelf out of clips
and pulling out of left side mounting holes. Reverse
procedure to reinstall shelf.
A
A
B
A.
Wire shelves
Freezer baskets and shelf
13
B.
Wire baskets
Publicité
Table des Matières
