Freezer Features - Amana ABB1921DEQ Guide D'utilisation

Freezer Features

Shelves and Baskets
Models with swing freezer door:
Freezer Shelf
(select models)
Select models have a shelf divider.
To Remove:
• Pull shelf out to full
extension. Tilt up front of
shelf and pull straight out.
To Install:
• Insert shelf into freezer liner rails and push to back
of compartment.
Wire Basket
(select models)
To Remove:
• Pull basket out to full
extension. Tilt up front of
basket and pull straight out.
To Install:
• Insert basket into freezer liner rails and push back
into place.
Freezer Door Shelf
The Freezer Door Shelf provides
convenient storage for frozen food
items in freezer door.
To Remove:
• Lift shelf from side liner tabs and pull
out.
To Install:
• Fit ends of shelf on liner tabs and slide down.
Models with pullout freezer drawer:
To prevent accidental child entrapment or
suffocation risk, do not remove the divider in the
top freezer basket
15
(select models)
DANGER
Upper Wire Basket
To Remove:
• Pull upper basket out to full extension and lift out to
remove.
To Install:
• Slide upper basket into freezer. Make sure that rear
of basket hooks behind rail catch.
Note:
Freezer Drawer Models: See page 5 for
lower basket and complete pullout drawer
instructions.
Accessories
Ice Cube Tray
(select models)
The Ice Cube Tray provides an area to
freeze cubes for manual
dispensing of ice.
To release ice cubes from tray,
hold tray upside down over a
storage container and twist
both ends of tray until cubes release.
Ice Service Rack
The Ice Service Rack holds the ice cube tray.
To Install:
• Slide L-shaped groove of shelf
down over back wall screw.
Push rack back until screw is
stopped in L-shaped groove
(1). Slide front portion of shelf over front wall
screw (2).
To Remove:
• Perform above steps in reverse order.
(select models)
1
1
2
2