Cleaning the cellular glass optic rod
Fig. 11
Cellular glass optic rod
entry point
Cotton Swab
Fig. 12
16
Cellular glass optic rod exit point
(X L, X KL, X SL, X WL, X BL Series)
Wipe clean the Cellular glass optic rod entry point (Fig.11) and
exit point (Fig. 12) with an alcohol-immersed cotton swab.
Remove all debris and oil.
Cotton Swab
Caution
Do not use a sharp tool to clean the Cellular glass optic rod.
It could damage the glass and reduce the light transmission.
If illumination becomes dim please contact your dealer.