8.10.1 Towing hitch
The permissible drawbar and drawing loads of the ma-
chine are indicated in the Chapter "Technical Specifica-
tions".
8.11 Towing hitch
1
1 Safety pin
2 Towing hitch
Unlock the safety bolt by turning it and pull it out toward
the side.
Slide the lorry hitch into the square pipes of the ma-
chine frame.
Slide in the safety bolt and lock it by turning it.
The permissible drawbar and drawing loads of the ma-
chine are indicated in the Chapter "Technical Specifica-
tions".
8.12 Coupling triangle
The coupling triangle enables the attachment of upgrade
kits already available at the municipalities.
9
Storage
WARNING
Risk of injury and damage! Note the weight of the appli-
ance in case of storage.
If the vehicle is not used for a longer period of time, ob-
serve the following points:
Park the vehicle at a safe, level and dry place.
Turn ignition key to "STOP" and remove it.
Secure vehicle against rolling away, lock parking brake.
Change the engine oil and the oil filter.
If frost is expected, check whether there is enough anti-
frosting agent in the cooling water.
Charge battery approx. every 2 months.
Disconnect the negative terminal of the battery if the
appliances is not used for more than 4 weeks.
50
1
2
1 Implement frame
2 Safety pin
3 Coupling triangle
8.12.1 Securing the coupling triangle
Attach the coupling triangle to the front power lift and
secure it by means of safety bolts.
8.12.2 Prerequisites for operation
– Depending on the weight of the mounted attachment,
counterbalance weights (option) must be attached to
the back of the appliance.
– Establish hydraulic connections depending on the at-
tachment.
Refer to the operating instructions of the attachment.
8.12.3 Operations
To raise and lower, operate the front power lifter with
the joystick.
18
-
EN