MANGA STREET SCOOP Montage page 7

PI
SEAT
ASSEMBLY
FILLED with SAND:
1
INDOORS: Fit base levellers/felt shoes
on the bottom in the 3 bushings to avoid
scratches on the floor.
OUTDOORS: No base levellers.
PLACED or JOINED to each
2
other?
PLACED: Place the Scoopis in the
desired layout. See page 1 for inspi-
ration. Here is a layout with 4 Scoop-
is and a Scoopi table. For mounting
Scoopi Table see page 8.
For joining Scoopis to each other
see page 5-6.
SCOoPI TABLE
Manga Street does not guarantee
against theft or vandalism.
When rubber button is delivered: Mount bracket before pouring in sand;
3
for guidance see page 10 (Wait with rubber button). Pour kiln-dried sand
in through the big hole inside Scoopi. Insert the large plug in the hole so
that it fits tightly. (If the sand is to be emptied out later, there is a plug in
the bottom of the Scoopi.)
SAND
100 kg/
220 lbs
Mount Scoopi Button: In Plastic see page 7. In rubber see page 10.
4
EN
125 kg/
275 lbs
4-12