Mounting Scoopi Button In Pe Plastic - MANGA STREET SCOOP Montage

PI
SEAT
MOUNTING - SCOoPI button
Fasten the two accompanying bolts in the upper bushes.
1
Place MARK in the bottom of Scoopi Button towards the
cavity of Scoopi Seat like shown here on the right. Attach
the Scoopi Button to the Scoopi Seat by pressing the two
holes in Scoopi Button over the screws until it clicks. Take
care of fingers when doing this. Use for instance body
weight. If it doesn´t click on firmly turn the button opposite.
2 x BOLTS M 10 mm
x 50 mm
MANGA STREET APS
Web: www.mangastreet.eu
Mail: manga@mangastreet.eu
SCOoPI BUTTON
MARK
This is RIGHT
This is WRONG
UNTIL IT CLICKS
SCOoPI BUTTON
7-12