Publicité
Les langues disponibles
Les langues disponibles
"Multiflex F", ZB angle pattern isolation fitting
EN
Application:
Oventrop ZB angle pattern isolation fitting (two
pipe block) for use on radiators with integrated
3
distributor G
⁄
.
4
Distance between pipe centres 50 mm.
To be used:
– as isolation fitting
– as support for the installation of pipework
Installation:
When installing the pipework, please ensure
the parallel installation as well as the correct
connection of the supply and the return pipe.
Install the ZB angle pattern isolation fitting
without tension.
Tighten the collar nuts of the connection ZB
angle pattern isolation fitting-radiator with a
torque of 20-30 Nm.
Please ensure that the fittings are always
accessible. Use the Oventrop compression fit-
tings for the connection of copper, precision
steel and plastic pipes as well as the composi-
tion pipe "Copipe". (Alternatively, the compres-
sion fittings of other manufacturers - except for
composition pipe "Copipe" - suitable for the
connection to male threads G
DIN EN 16313 (cone "Euro") can also be used.)
Subject to technical modification without notice.
3
⁄
according to
4
For an overview of our global presence
visit www.oventrop.com.
Valves, controls + systems
Item No. 1015814
Installation instructions
Publicité
