Hauck Drive Manuel D'instructions page 11

UPKEEP AND MAINTENANCE
GB
In General
Please check the pram functions on a regular basis. Make sure that the frame
is stable, the screws are tight, the latching devices are safely locked, the
wheels are securely attached and the brakes are in working order. Check the
covers occasionally, making sure that the stitching is still fi rm, and inspect
the quality of the plastic parts. Any defective or worn working parts should be
replaced immediately. Proceed in the same manner with components that are
broken, torn, defect or worn-out. Please use only original hauck replacement
parts.
Do not subject your pram to excessive solar radiation. This can lead to a
fading of the textile covers and plastic parts.
Cleaning the covers
Remove the cover from the frame by loosening the loops, press studs or
screws. Please read the instructions on the sewn-in washing label before
washing.
To clean the cover gently, wipe it down evenly using only a damp cloth. When
cleaning cloth covers with non-removable lining, please take care not to
drench everything. As long as there are no plastic, wood or metal parts on or
in the cover, it can be machine-washed at 30° and spun at medium speed.
The cover should be air-dried, but not exposed to blazing sun. Please do not
dry the cover in the drier, so as to avoid shrinking. Do not re-fi t the covers until
they are completely dry.
Cleaning the frame
Dry the pram with a soft cloth after cleaning or after use in rain and snow. Use
only mild soapy water or lukewarm water to clean the frame of your pram.
Plastic parts can be cleaned with standard cleaners.
Wheel maintenance
Clean and service the wheels regularly. Treatment with a silicon or corrosion
spray protects against rust and deposits. Please make sure in winter that road
salt residue is removed immediately. Remove dirt from the wheels and axes on
a regular basis.
NL
11