ProBreeze PB-01 Mode D'emploi page 5

- Vertical Angle Adjustment
1. To change the tilting angle of the fan head, loosen the tilt adjustment screw
by turning it anti-clockwise.
2. Move the fan head to the desired angle, then firmly tighten the tilt
adjustment screw by turning it clockwise to lock the fan head in position.
- Horizontal Angle Adjustment
• The fan head can be rotated through 360 degrees on its central pillar.
• Grasp the fan head and turn to the desired direction.
CLEANING
- Unplug from the electricity supply before cleaning.
- Clean only with a duster or soft dry cloth.
- Do not use harsh abrasive cleaning products.
MAINTENANCE
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified
service personnel if service is required.
- To ensure adequate air circulation keep the air vents at the rear of the main body
free from dust or fluff. Use a vacuum cleaner to remove these when necessary. Do
not probe any opening to remove dust or fluff.
- Do not allow water or any other liquid into the motor housing or interior parts.
DISPOSAL
This marking indicates that this product should not be disposed of with
other household waste throughout the EU, this is to prevent possible harm
to the environment and human well-being. Contact your local authority for
information regarding the collection systems available. If possible, recycle it
responsibly to promote the sustainable reuse of resources.
English | 4