Maytag MD-1 Guide D'utilisation Et D'entretien page 9

Refresh (select models)
The Refresh cycle is designed to release wrinkles from
items that are clean and dry but only slightly wrinkled,
such as from a crowded closet or suitcase or from
sitting in the dryer too long after the cycle has ended.
Refresh can be used with any temperature selection.
Note: If the dryer detects moisture in the load when
Refresh is selected, the dryer will automatically switch
to the Wrinkle Control cycle which may extend the
cycle time.
Regular
The Regular cycle is designed to dry loads such as
towels and underwear.
Jeans (select models)
The Jeans cycle is designed to reduce wrinkling and
tangling in loads of jeans.
Wrinkle Control
The Wrinkle Control cycle is designed to dry wrinkle-
free cottons, synthetic fabrics, knits and permanent
press fabrics automatically.
Select models will automatically advance into Wrinkle
Prevent which provides an extra 30 minutes of
unheated tumble action at the end of the cycle.
On dryer models with optional Wrinkle Prevent, the
additional 95 minutes of unheated tumbling can be
canceled by turning the switch to Off or by opening
the door.
Cycles and options may vary by model.
Delicates
The Delicates cycle is designed to dry heat-sensitive
items at the low drying temperature.
Time Dry/Air Fluff
The Time Dry cycle can be used to regulate the drying
time. Use with any temperature setting. For timed
drying, turn the cycle selector dial to the number of
minutes desired. An indicator light will illuminate by
the setting.
Note: Using the Air Fluff temperature setting will
require a longer drying time.
STEP 5
Start the Dryer
After setting the cycle and desired options, press the
cycle selector dial to start the dryer. To pause the
cycle, press cycle selector dial again or by opening
the door. To restart the cycle, press cycle selector dial
and cycle will resume from the point of interruption.
Power Off
Turn the cycle selector dial to Power Off to cancel
the cycle and stop the dryer.
8