Concise User's Guide
Troubleshooting
Problem
The battery status LED
indicator
, is blinking
orange.
The sound cannot be
heard or the volume is very
low.
The DVD regional codes
can no longer be changed.
The Wireless LAN/
Bluetooth modules cannot
be detected/configured.
The PC Camera module
cannot be detected.
40 - Troubleshooting
Low Battery. Plug in the AC/DC power source. If the computer doesn't start up immediately, turn it off
then on again.
The volume might be set too low. Check the volume control in the Volume Control panel in the
Windows taskbar, or use the key combination Fn + F5/F6 (see
adjust.
The code has been changed the maximum 5 times. See
page
18.
The module(s) are off. Check the LED indicator
Indicators" on page
13). If the LED indicator is off, then press the Fn + F11 (WLAN) or Fn + F12
(Bluetooth) key combination(s) in order to enable the module(s) (see
The driver(s) for the module(s) have not been installed. Make sure you have installed the driver for the
appropriate module (see the instructions for the appropriate module in
The module is off. Press the Fn + F10 key combination in order to enable the module (see
Keys" on page
15). Run the BisonCap program (see
picture.
Possible Cause - Solution
"Audio Features" on page
"Changing DVD Regional Codes" on
to see if the module is on or off (see
"PC Camera" on page
25) to
"LED
"Function Keys" on page
15).
"Module Drivers" on page
35).
"Function
39) to view the camera