Concise User's Guide
System Map: Right View
Figure 8 - Right View
1.
Headphone-Out Jack
2.
Microphone-In Jack
3.
USB 2.0 Port
4.
Optical Device Drive Bay
(for CD/DVD Device)
5.
Emergency Eject Hole
6.
DC-In Jack
CD Emergency Eject
If you need to manually eject a CD/DVD (e.g.
due to an unexpected power interruption) you
may push the end of a straightened paper clip
into the emergency eject hole. Do not use a
sharpened pencil or similar object that may
break and become lodged in the hole.
Media Warning
Don't try to remove a floppy disk/CD/DVD
while the system is accessing it. This may
cause the system to "crash".
18 - System Map: Right View
3
1
2
Changing DVD Regional Codes
Go to the Control Panel and double-click System > Hardware (tab), click
Device Manager, then click the + next to DVD/CD-ROM drives. Double-
click on the DVD-ROM device to bring up the Properties dialogue box, and
select the DVD Region (tab) to bring up the control panel to allow you to
adjust the regional code.
DVD region detection is device dependent, not OS-dependent. You can se-
lect your module's region code 5 times. The fifth selection is permanent.
This cannot be altered even if you change your operating system or you use
the module in another computer.
4
5
6