MSI Megabook L730 Guide Utilisateur page 35

Port Replicator Setup Instructions
1. Turn the computer OFF.
2. Attach the Port Replicator's external monitor cable to the external monitor port on the rear of the computer.
3. Attach the Port Replicator's power cable to the DC-In jack on the right of the computer.
4. Attach the Port Replicator's (90W) AC/DC adpater unit to the DC-In jack on the left side of the Port Replicator (DO NOT
USE THE COMPUTER'S POWER SUPPLY UNIT TO POWER THE PORT REPLICATOR - see
Adapter" on page 28).
5. Turn ON the computer.
6. Install the serial port driver provided (see
7. Install the LAN driver provided (see
8. Plug in any devices you require into the appropriate Port Replicator port/jack (note certain devices may require their own
drivers, and/or the computer to restart).
"Port Replicator Serial (COM) Port Driver" on page
"Port Replicator Network (LAN) Driver" on page
Concise User's Guide
"Port Replicator AC/DC
37).
38).
Port Replicator (Optional) - 29