MSI Megabook L730 Guide Utilisateur page 29

Attaching Other Display
1. Attach the external display to the external monitor port and turn it on.
2. Click Advanced in the Display Properties control panel (see
3. Select S3Display (tab).
4. Click to put a tick in the tickbox under the CRT icon.
5. Click Apply > OK and allow the monitor time to refresh the display.
6. Click Yes to confirm the settings.
Figure 12 - S3 Display
"Video Features" on page
You can also use the S3Tray Plus Utility in
the taskbar to configure an external display.
Attach the external display (CRT) to the ex-
ternal monitor port.
Right-click the
select S3Display.
Select the CRT (it should have a tick along-
side it) and click Yes to confirm the settings.
Concise User's Guide
21) to display the additional tabs.
S3Tray Plus Utility
icon in the taskbar and
Video Features - 23