Wifi Transmission - Carson Easy Tyrann 370 Mode D'emploi

wIFI tranSmISSIon

Mobile phone holder installation
1
1. Attach the mobile phone retaining bracket to the antenna as shown in figure 1.
2. Compress the clip to the required size at the rear.
3. Insert your mobile phone into the clip.
FPV App (jADuFo) for Smartphone - Download and installation
In order to transmit the video signal to the
Smartphone, you must load and install the
respective mobile phone app. There is an IOS
version for all iPhones and an Android ver-
sion for devices with the Android operating
system. Please install the application on your
mobile phone and go to the next step.
establishing the connection
Switch in the helicopter first as usual, then the transmitter. The LED on the camera now illuminates in blue. You can now connect your mobile
phone to the model using Wlan. Open the settings in your mobile phone menu and select "F25_......" in the Wlan search list of your Smart-
phone . Wait for the connection to be established. After successfully connecting, start the FPV app and then press the PLAY button on the
user interface. The image from the camera should now be visible on the screen. If this is not the case, repeat the procedure.
1
......
explanation of icons on the display
1 2 3
2
2
1. Back
2. Shutter release for photos
4
3. Video start / stop
4. Memory / videos and photos
Only applies to the numbered
functions for the Easy Tyrann
370 FPV.
3
Version for
iPhone
devices
3
Recording of photos and videos
When the Wlan connection is stable and the live
image is being transferred to the display of your
Smartphone, you can now take photos or record
videos via the application. Press the photo icon (2)
for snapshots. To record a video, the video camera
symbol (3) must be pressed. Press once to start
recording. Pressing a second time stops the recor-
ding. The recordings can be found in the memory
of the App (icon 4).
Version for
Android
devices
25 // GB