Service And Maintenance - tormek T-1 Mode D'emploi

Service and maintenance

Replacing the Knife Protection Pads
Slide the guide off the shaft and remove the clamp.
Remove the self-adhesive pads from both the clamp and the
guide. Replace with new pads.
Cleaning the magnet
Unclip the magnet from the
guide and wipe away the
sharpening dust using a dry
cloth or kitchen paper towel.
Tip! With the Knife
Protection Pads removed,
clean out any sharpening
particles between the
clamp and the guide.
Note: The shapes of the
Knife Protection Pads are
different for the guide and
clamp.
EN
11