Publicité
Les langues disponibles
Les langues disponibles
To change the recording option:
1 Press
2 Browse to Menu 1 > D-LOG, and press
3 Use the arrow keys to change the recording option.
4 Press
5 Press and hold
Changing the sample interval duration
This setting is used with the multimeter's Interval Data Logging feature (see
page
every sample interval.
Parameter
LOG TIME
To change the sample interval duration:
1 Press
2 Browse to Menu 1 > LOG TIME, and press
3 Use the arrow keys to change the sample interval duration.
4 Press
5 Press and hold
Changing the decibel display
This setting is used with dB measurements (see
multimeter to display voltage as a dB value, either relative to 1 milliwatt (dBm) or
a reference voltage of 1 volt (dBV).
Keysight U1273A/U1273AX User's Guide
for more than 1 second to enter the multimeter's setup menu.
Setup
to save your changes (or press
until the multimeter restarts to return to normal operation.
Setup
116). The multimeter will record a measurement value at the beginning of
Range
(1 to 99999) s
for more than 1 second to enter the multimeter's setup menu.
Setup
to save your changes (or press
until the multimeter restarts to return to normal operation.
Setup
Multimeter Setup Options
edit the value.
to discard your changes).
Defaul t setting
00001 S
edit the value.
to discard your changes).
page
64). You can enable the
4
133
Publicité
