Directions For Use - Klarstein 10009872 Instructions D'utilisation

Clean its parts in contact with food materials thoroughly before using the product for the fi rst time (see
the content of "Maintenance").
I. Use of product (see "Parts and their functions" for names of the following parts)
The product is designed with a dual-action safety system and can run after all parts are correctly
installed. Install and use the product following the steps below
11

Directions for use

Gears:
Inching: For instant and quick turning
0: For closing and stopping
1: A low-speed gear for processing soft fruits and vegetables such as
watermelon, tomato, cucumber and strawberry
2: A high-speed gear for processing all fruits and vegetables (see "II.
Tips for fruit selection" under "Directions for use" for the selection
of fruits, vegetables and gears)
1 Put the middle ring on the main unit.
Put the juice strainer into the middle ring and properly
2 (before use, check whether the juice strainer is
damaged and, if it is, do not use the product
but contact a near service center at once).
Fit the top cover over the middle ring and press it for fi xing.
Raise the plate fasteners on two sides, have them align with the
3
positions of the top cover and gently press until the plates are
fi rmly locked, otherwise the product will not run.
install it on the motor wheel
fastening