4.4 OFF CENTER TILT FEATURE (OCT)
The OCT feature is used to trim in hard to reach places. This feature enables both the trimmer head and body to tilt for
located on the right side of the Wheeled Trimmer. To engage the OCT feature, simply move the handle into one of the
four settings that are available.
1. Level:
position closest to the rear of the trimmer.
Figure 4.1, Level
2. 5.4 degrees:
the second position from the rear of the trimmer.
Figure 4.2, Second Position
3. 10.3 degrees:
the third position from the rear of the trimmer.
4. 13 degrees:
the position closest to the front of the machine for
maximum tilt.
WHEELED TRIMMER
Figure 4.3, Third Position
Figure 4.4, Closest to Front
OPERATION
7