Contents; Safety Information - AquaScape AQUAFORCE 4000-8000 Instructions Et Entretien

Masquer les pouces Voir aussi pour AQUAFORCE 4000-8000:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Contents

No.
Description
1.
AquaForce Adjustable Flow Pond Pump
2.
Smart Control Receiver
3.
Multi-hose Adapter 1", 1.25", 1.5"
4.
1.5" Rotational Ball Output
5.
Multi-hose Adapter 1.5", 2"
6.
1.5" Female Adapter
7.
38mm FTP x 1.5" MPT

Safety Information

WARNING: Risk of electric shock – This pump
has not been approved for use in swimming
pool or marine areas
WARNING: To provide continued protection
against risk of electric shock, connect to
properly grounded, ground fault circuit
interrupter (GFCI) outlets only, using the
following guidelines:
(A) Have a qualified electrician install a properly grounded
receptacle outlet, acceptable for outdoor use and
protected from snow and rain.
(B) Inspect cord before using.
(C) Do not use extension cords.
(D) Any wiring of pumps should be performed by a
qualified electrician to ensure code compliance and
user safety.
aquascapeinc.com |
CAN (866) 766-3426 |
3
5
4
US (866) 877-6637
7
6
2
1
NOTE: TITLE BLOCK TOLERANCE
NOT APPLICABLE
B
B
A
A
REV
DESCRIPTION
NAME
DATE
PROPRIETARY AND CONFIDENTIAL
UNLESS OTHERWISE SPECIFIED:
CREATED BY
EAK
CREATED DATE
11/05/18
TITLE:
MED. DENSITY RIGID FILTER MAT
THE INFORMATION CONTAINED IN
DIMENSIONS ARE IN INCHES
THIS DRAWING IS THE SOLE
TOLERANCES:
CHECKED BY
CHECKED DATE
PROPERTY OF AQUASCAPE INC.
FRACTIONAL 1/16
DWG. NO.
ANY REPRODUCTION IN PART OR
56000-PP-2
AS A WHOLE WITHOUT THE WRITTEN
ANGULAR: MACH 5 BEND 5
TWO PLACE DECIMAL
.010
PERMISSION OF AQUASCAPE INC IS
THREE PLACE DECIMAL
.005
SCALE: 1:4
SIZE
A
SHEET 1 OF 1
A
PART REDESIGN
EAK
11/05/18
PROHIBITED.
INTERPRET GEOMETRIC TOLERANCING PER: ANSI
2
1
(E) Unplug pump at receptacle outlet when not in use or
before removal from pond.
(F) To reduce risk of electrical shock, all wiring and
junction connections should be made per local codes.
Requirements may vary depending on usage and
location.
(G) The power cable should be protected at all times to
avoid punctures, cuts, bruises and abrasions.
(H) Never handle power cords with wet hands.
(I) Do not remove cord and strain relief. Do not connect
conduit to pump.
(J) Do not use power cable
to lift pump.
1
2
3

Publicité

Table des Matières
loading

Table des Matières