Contents; Safety Information - AquaScape Ultra 400 Instructions

Contents

Contents 400/550/800
No. Description
1. (1) Ultra Water Pump
TM
2. (1) ½" Valve
(1) ¾", 1", 1¼" Multi-Hose
3.
Adapter
4. (1) FPT 90 Elbow ½"
0
5. (1) MPT Coupling ½"
Helpful Symbols
WARNING Symbol - Will alert you to the
possibility of damage or injury if you do not
comply with the warnings that accompany them.
The hazard may come from something
mechanical or from electrical shock.

Safety Information

WARNING: Risk of electric shock – This pump
has not been approved for use in swimming
pool or marine areas.
WARNING: To provide continued protection
against risk of electric shock, connect to
properly grounded, ground fault circuit
interrupter (GFCI) outlets only, using the
following guidelines:
(A) Have a qualifi ed electrician install a properly
grounded receptacle outlet, acceptable for outdoor
use and protected from snow and rain.
(B) Inspect cord before using.
(C) Do not use extension cords.
Optional Accessories
Ultra Pump Fountain Head Kits
™
Incorporate a fountain into your pond by adding an Ultra
Ultra Water Pump. Each kit comes complete with three fountain head options: Waterbell,
TM
Foaming Jet and Daisy. Each kit also includes four 3.5" extensions for customizable fountain
height and an integrated diverter valve that allows you to easily divert water to an external
fi lter, ornamental spitter or waterfall.
Item #91045 is compatible with 400/550/800 Water Pumps.
Item # 91046 is compatible with 1100/1500/2000 Water Pumps.
aquascapeinc.com | CAN 1-866-766-3426 |
Contents 1100/1500/2000
No. Description
1. (1) Ultra Water Pump
TM
2. ¾" 3-Way Valve
(1) 1", 1¼", 1½" Multi-Hose
3.
Adapter
(1) ¾", 1", 1¼" Multi-Hose
4.
Adapter
5. (1) FPT 90 Elbow ¾"
0
6. (1) MPT Coupling ¾"
Pump Fountain Head Kit to your
TM
US 1-866-877-6637
Ultra ™ 400/550/800
1
Ultra 1100/1500/2000
™
1
TIP symbol - Helpful information provided by a
professional pond installer.
(D) Any wiring of pumps should be performed by a
qualifi ed electrician to ensure code compliance
and user safety.
(E) Unplug pump at receptacle outlet when not
in use or before removal from pond.
(F) To reduce risk of electrical shock, all wiring
and junction connections should be made per local
codes. Requirements may vary depending on usage
and location.
(G) The power cable should be protected at all times to
avoid punctures, cuts, bruises and abrasions.
(H) Never handle power cords with wet hands.
(I) Do not remove cord and strain relief. Do not
connect conduit to pump.
(J) Do not use power cable to lift pump.
Item #91045
2
3
4
5
2
5
3 4
6
Item #91046
3