Table des Matières
Publicité
2.4
2.5
2.6
Assembling the Pop (continued)
2.4
Finally, press down gently upon
the rear locking catch, positioned
between the rear wheels, to lock your
pushchair.
WARNING: FAILURE TO DO
THIS WILL CAUSE DAMAGE
TO YOUR PUSHCHAIR.
Place the pushchair on a flat surface
and ensure that the pushchair moves
freely.
2.5
To fit your Pop hood, locate the clips
on the hood. Now attach the hood
to the Pop chassis by sliding clips
over the hood connection bracket.
A positive engagement should be
ensured.
2.6
Connect the fabric of the hood
to the fabric of the seat with two
press studs, one on each side of the
pushchair.
2.7
Connect the fabric of the hood to
the rear leg of the chassis with two
press studs, one on each side of the
pushchair.
2.7
5
silvercrossbaby.com
Publicité
Table des Matières
