Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS CONTROL FUNCTIONS
POWER
The POWER switch supplies power to all of the
function of the fireplace. This switch must be in
" "
position for any functions including the
remote to work.
FLAME
Each time the FLAME button is pressed, the
intensity of the flame decreases. There are six
brightness levels you can cycle through including
"
"
the
OFF setting.
HEAT
The HEAT button will turn ON/ OFF he heat out-
put. When the heater is turned on it will take
several seconds for the unit to begin blowing
hot air. The heat indicator was installed in log set.
When the unit was ON the log set will be light up
to indicate the unit was on.
Models: DFI016ARA/DFI016ARU/DFI020ARA/DFI020ARU
TEMPERATURE
The TEMPERATURE control knob regulates the tem-
perature level of the heater. The further the knob is
rotated clockwise, the higher the set point temperature.
Turning the knob counter-clock-wise will lower the set
point temperature. Use this function to help regulate
the ambient temperature level.
WARNING: During any service of this appliance,
the power to the unit must be turned off. First turn
the main power switch to the
Then remove the electrical plug from the wall outlet.
Fig. 3
5
"
"
OFF position.
Publicité
