ARENDO 305531 Mode D'emploi page 22

5. Select the desired browning using the degree of browning regulator.
6. Once the waffle meet your requirements and the baking is finished, open
the appliance lid and remove the waffle from the appliance.
Caution! Please do not use metal objects to remove the waffle. This can damage
the non-stick coating!
7. Finally disconnect the plug from the mains socket.
6. Adjusting the degree of browning
The "Degree of browning regulator" allows you to specify the duration after
which the heating element of the waffle maker switches off automatically. The
longer the heating element is activated, the darker will be the waffle at the end of
the browning time.
The maximum degree of browning can be achieved by turning the regulator to
the extreme right (maximum mark).
7. Cleaning and Care
Before cleaning the waffle maker, unplug it completely from the mains by removing
the power plug. Wait until the appliance has cooled down completely. Clean only
the surface with a slightly damp cloth. Never use a metal polish for this purpose!
Do not immerse the appliance in water under any circumstances!
Please do not use any aggressive or chemical cleaning agents!
22
English