Remote Control - AKASO BRAVE 7 LE Mode D'emploi

EN
• Do not make any unauthorized alterations to the camera. Doing so may compromise
safety, regulatory compliance, performance, and may void the warranty.
WARNING: Do not drop, disassemble, open, crush, bend, deform, puncture, shred,
microwave, incinerate or paint the camera or battery. Do not insert foreign objects
into the battery opening on the camera. Do not use the camera or the battery if it has
been damaged - for example, if cracked, punctured or harmed by water.
Disassembling or puncturing the battery can cause an explosion or fire.

Remote Control

Video
To record Video, verify the camera is in Video mode.
To start recording:
Press the grey Video Button. The camera will emit one beep and the camera light will
flash while recording.
To stop recording:
Press the grey Video Button again. The camera will emit one beep and the camera
light will stop flashing while recording.
Photo
To capture a photo, verify the camera is in Photo mode.
To take a photo:
Press the red Photo Button. The camera will emit a camera shutter sound.
Photo Button
Video Button
Splashproof only, not waterproof
20