AKASO BRAVE 7 LE Mode D'emploi page 23

EN
Burst Photo
To capture a Burst Photo series, verify the camera is in Burst Photo mode.
To take a Burst Photo series:
Press the Red Photo Button. The camera will emit a camera shutter sound.
Time Lapse
To capture a Time Lapse series, verify the Continuous Lapse is ON and camera is in
Time Lapse Mode.
To take Time Lapse:
Press the Red Photo Button. The camera initiates countdown and emits a camera
shutter sound each time a Photo is taken.
CR2032 Battery Replacement for Brave 7 LE Remote
1. Use a 1.8mm Phillips tip screwdriver to remove the 4 screws on the back cover of
the remote, allowing you to open it.
2. Remove another 4 screws on PCB board.
21