AKASO BRAVE 7 LE Mode D'emploi page 16

Masquer les pouces Voir aussi pour BRAVE 7 LE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 78
EN
4. Effect: Normal/BW/Natural/Negative/Warm/Brightness Contrast
Default setting is Normal.
5. Distortion Calibration: Off/On
Default setting is Off.
Turn on Distortion Calibration, it can correct the image distortion.
6. Driving Mode: Off/On
Default setting is Off.
If you turn on Driving Mode and connect camera with car cigarette lighter, the camera
will turn on automatically if you start your car and will turn off if you stop your car.
7. Upside Down: Off/On
Default setting is Off.
This setting determines the orientation of your video or photos to help you prevent
upside down footage.
8. Screen Saver: Off/1 Min/3 Min/5 Min
Default setting is 1 Min.
Screen saver helps to turn off the display after a period of inactivity to save battery life.
To turn on the display again, press any button or tap the screen on the camera.
9. Auto Power Off: Off/1 Min/3 Min/5 Min
Default setting is 3 Min.
Auto Power Off helps to power off camera after a period of inactivity to save battery
life.
10. Power Frequency: 50Hz/60Hz
Default setting is 50Hz.
11. White Balance: Auto/Daylight/Shade/Tungsten Light/White Fluorescent
Default setting is Auto.
White Balance lets you adjust the color temperature of videos and photos to optimize
for cool or warm lighting conditions.
14

Publicité

Table des Matières
loading

Table des Matières