Lumilight Led - Zephyr Verona Island ZVN-M90BG Guide D'utilisation, D'entretien Et D'installation

C O R E
Maintenance
V E R O N A
I S L A N D

LumiLight LED

In the unlikely event that your LumiLight LED fails, please contact Zephyr to order replacement parts.
See the list of parts and accessories page for part numbers and contact information.
LED Removal (FIG. L):
1. Remove aluminum mesh filter.
2. Remove each side panel by two screws.
3. Remove light panel by two screws.
4. Disconnect LED light quick connector.
5. Push in the two side clips on the ends of the LED light.
6. Push LED light through the light panel opening.
Push the clip
FIG. L
28 Verona Island Use, Care, and Installation Guide