Blueair Pure Fan Auto Manuel D'utilisation page 16

Clean the air quality sensor
The air quality sensor is located on the
Important!
Do not use fingers or any unrecommended objects to clean inside the sensor inlet.
Step 1
Turn the unit off and
unplug it.
Step 3
Remove the back of the
unit.
Step 5
Using circular motions,
gently clean the sensor
with a clean cotton swab,
and attach the sensor lid
when done.
Step 7
Plug in and turn on the
unit.
side of the fan purifier.
Step 2
Gently press the release
buttons on both sides of
the unit until you hear a
click.
Step 4
Press the release tab on
the inside of the unit to
open the lid covering
the sensor and remove
the lid.
Step 6
Place the filter and frame
onto the bottom part
of the unit. Firmly press
until you hear a click.
16