Responsibility Of The Owner And/Or User Of The Tool; Packaging; Important Safety Information And Safety Instructions - Montipower DIE BLASTER Mode D'emploi

®
Die Blaster
1.

Responsibility of the owner and/or user of the tool

These operating instructions form part of the items supplied for the Die Blaster
this tool, also if sold.
The owner and/or user of the Die Blaster
®
Die Blaster in operation.
The manufacturer is not liable for injuries or damage due to incorrect or improper usage of the Die Blaster
2.

Packaging

The packaging material must be disposed of in accordance with local regulations.
3.

Important safety information and safety instructions

The statutory health and safety regulations, generally recognised safety and occupational health rules, as well as
the health and safety regulations for power-driven equipment are to be observed.
Any use beyond these limits is considered incorrect.
The manufacturer is not liable for any resulting damage. The operating instructions form part of the items supplied
and are to be provided to the new user on resale of the Die Blaster
To ensure safe operation, it is to be ensured that the Die Blaster
appropriately trained personnel.
Qualified personnel are individuals who, due to their training, experience and instruction as well as their knowledge
of applicable standards, stipulations, health and safety regulations, are qualified to undertake the related necessary
actions and can identify and avoid possible hazards during this process.
The operating organisation must ensure that personnel tasked with operation, maintenance and servicing have read
and understood the operating instructions and follow all points in the instructions:
- To avert hazards for the life and limb of the user and others
- To ensure the reliability of the Die Blaster
- To prevent downtime and pollution due to incorrect actions.
The responsibilities for the work must be clearly defined and observed so that there are no unclear areas of
authority in relation to safety.
The mechanical servicing tasks are to be undertaken at the stipulated intervals and with the stipulated scope.
®
must be familiar with the instructions for use before placing the
®
®
and
Operating instructions
®
and must always accompany
®
.
is only operated, serviced or repaired by
ENG
®
.
15