Fantini Cosmi Intellitherm Techno W C55 Mode D'emploi page 6

UK
Intellitherm C55 DISPLAY
USING Intellitherm C55 WITH STANDARD PROGRAMS
After installing and connecting Intellitherm C55, just proceed as described in the following numbered steps:
1
Move switch S to AUTO, for operation with the STANDARD WEEKLY AUTOMATIC program with factory-set
operating times and temperatures
FROM MONDAY (DAY 1) TO FRIDAY (DAY 5)
°C
20
17
5
OFF
6,30 8,30 11,30
SETTING CURRENT TIME AND DAY
Operations described in these steps can be performed
before all the others
use keys H to set the current time
6
use key D to set the current day of the week
7
1=Monday - 2=Tuesday - 3=Wednesday -
4=Thursday - 5=Friday - 6=Saturday - 7=Sunday).
THE OTHER Intellitherm C55 PROGRAM
OFF -
this program keeps the system constantly off or with antifreeze
protection according the setting made at the time of installation (see previous page)
ALWAYS SAVING -
the blue keys.
ALWAYS COMFORT - this program keeps constantly the COMFORT
temperature set with the red keys.
The display constantly shows the room temperature, the current time and day of the week, if the
heating system is on
charge symbol
clock, divided into 48 sectors each corresponding to half an hour. Each sector is divided in half
and it is coloured (according to the selected program) red, half red and half black, black. The
colour of the sectors indicates the type of temperature programmed for that period:
-Red: comfort temperature -Half red and half black: saving temperature -Black: off
13,30 17 22
H D
this program keeps constantly the SAVING temperature set with
(or the air conditioning system
. The display also shows a programming ring representing a 24-hour
with factory-set time periods and temperatures.
FROM SATURDAY (DAY 6 ) TO SUNDAY (DAY 7)
°C
20
17
5
OFF
8
2
3
Reset key. Keep it pressed with the
point of a pen or the tip of a tool for a
few seconds to reset any programming
made and to restore the standard
program
I
P
6
in summer) and the low battery
=COMFORT MODE
=SAVING MODE
=ANTIFREEZE MODE
22,30
Use the red keys to set the COMFORT
temperature.The display will show
the set temperature instead of the
ambient temperature.
use the blue keys to set the SAVING
temperature.The display will show
the set temperature instead of the
ambient temperature.
4
make sure switch I is down on
winter position
5 make sure switch P is down
on AUTO (automatic) position
AUTO AUTO