Preparation; Removing The Insulating Tape; Switching Between °C And °F - Omron MC-521-E Mode D'emploi

MC-521-E_A_M_main.book Page 4 Monday, April 16, 2018 5:11 PM

2. Preparation

2.1

Removing the Insulating Tape

Pull the insulating tape out from the battery
compartment by catching the outer part for the first time.
The unit is turned on and after 1 minute the room
temperature will appear on the display.
Notes:
• The room temperature remains on the display even after the unit turns off.
• Place the unit on the table and avoid the direct sunshine or air conditioner flow on for the room temperature.
2.2
Switching between °C and °F
This unit is set in °C as default.
1.
While the room temperature is displayed, press and hold the START
button.
2.
While holding it down, press and hold the
ON/MEM button until °F appears on the display
with 2 beeps.
Notes:
• To select the °C mode, start from step1.
• When the unit is switched between °C and °F, all the readings stored in the
memory are deleted.
4