Replacing The Battery - Omron MC-521-E Mode D'emploi

MC-521-E_A_M_main.book Page 15 Monday, April 16, 2018 5:11 PM
4. Troubleshooting and Maintenance
• Do not store the unit in the following types of places. Doing so may damage the unit.
- Wet locations.
- Locations with high heat and humidity or those that are exposed to direct sunlight. Areas close to heating
equipment, dusty locations, or environments where there are high salt concentrations in the air.
- Locations where the unit will be subjected to leaning over, falling, shock or vibration.
- Pharmaceutical storage areas or locations where corrosive gases are present.
4.3

Replacing the Battery

Battery: CR2032 Lithium Button Battery
Use the battery within recommended period mentioned to it.
Note: To protect the environment, discard the used batteries in accordance with the local regulations regarding
waste disposal procedure. Disposal can be done at your retail store or at appropriate collection sites.
1.
Insert a pointed object into the battery cover pick hole. Slide
and remove the battery cover with your thumb.
2.
Remove the battery with a pointed object.
Note: Do not use metal tweezers or a screwdriver.
EN
15