Samsung DVD-1080P9 Manuel D'utilisation page 7

Rear Panel
1. SCART JACK
- Connect to a TV scart input jack
2. AUDIO OUT JACKS
- Connect to the Audio input jacks of your television or
audio/video receiver.
3. DIGITAL AUDIO JACKS
- Use either an coaxial digital cable to connect to a
compatible Dolby Digital receiver.
- Use either an coaxial digital cable to connect to an
A/V Amplifier that contains a Dolby Digital, MPEG2 or
DTS decoder.
4. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide PR, PB and Y
video.
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in
the TV's menu system.
- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conver-
sion adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.
- There may be no image output if the DVD player is connected to a TV or display that is not compatible
with the above format.
- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.
- See pages 29 ~ 31 to get more information on how to use the setup menu.
All manuals and user guides at all-guides.com
- If P-SCAN Video Output is selected in Setup Menu,
progressive scan mode will work.
- If I-SCAN Video Output is selected in Setup Menu,
interlaced scan mode will work.
5. HDMI OUT JACK
- Use the HDMI cable to connect this jack to the HDMI
jack on your television for the best quality picture.
- If an HDMI cable is connected to an HDMI-compat-
ible TV, HDMI will be output automatically within 10
seconds.
6. VIDEO OUT JACK
- Use a video cable to connect to the Video input jack
on your television.
English _7