Philips SONICARE 3000 Serie Mode D'emploi page 19

Activating or deactivating features
EasyStart
the toothbrush at the end of the brushing
cycle.
Dental professionals recommend brushing no
less than 2 minutes twice a day.
Note: If you press the power on/off button
after you started the brushing cycle, the
toothbrush will pause. After a pause of 30
seconds, the SmarTimer resets.
You can activate or deactivate the following
features of your toothbrush:
- EasyStart
- Brush head replacement reminder
- Pressure sensor
To activate or deactivate these features, follow
the instructions below:
1 Put the handle on the plugged-in charger.
2 Press and hold the power on/off button
while the handle remains on the charger.
3 Keep the power on/off button pressed until
you hear a single short beep (after 3
seconds).
4 Release the power on/off button.
- Triple tone of low-med-high means the
EasyStart feature has been activated. The
battery level indicator light will also blink
green 2 times to confirm activation.
19
English