Horizon Global 76926 Instructions D'installation page 6

1. Remove taillights - Open tailgate. Remove plastic cover near taillight, using a phillips head screwdriver, remove (2) push-pin rivets holding cover to taillight housing,
both sides. Using a 10mm socket, remove (2) screws from taillight and remove taillight by gently pulling rearward. Disconnect the wiring and set taillight aside, both
sides.
2a. Remove fascia - Using a flat head screw driver, remove (3) plastic push-pin rivets from along bottom center edge of fascia.
©2022 Horizon Global Americas Inc. - Printed in Mexico Sheet 6 of 30 76926NP 7/5/22 Rev. A