Publicité
Approach the terminals, leaving the space of 4 cm between the two extremities
with the help of the template provided.
1
Install the lower cover joint, fixing it
to the elements with the screws
provided.
2
Lay the tap off box on the busbar,
corresponding the hole in the box
with the junction.
4
Revisione 2
K SERIES
Match the punched upper cover joint
to both extremities as shown in the
picture.
3
Insert the two long screws supplied
inside the holes set at the bottom of
the tap off box.
5
Pag. 2 di 4
1000 - 5000 A
ISTR-K- K25DV60PDV_rev 02.doc
Publicité
