Energy Settings; Logging; System; Information - MACHEREY-NAGEL NANOCOLOR Advance Mode D'emploi

System

12.3 Energy Settings

12.3.1 Logging

13. System

13.1 Information

34 Spectrophotometer NANOCOLOR
Clicking the Energy Settings entry opens a dialog box for setting
the energy settings. Here you can set the time after which the
device switches to standby mode. Users logged in at this time are
automatically logged out. By tapping on the device display, the
standby mode is ended. The default setting is 10 minutes.
The Auto Off (Battery) setting can be used to define the automatic
switch-off time in battery mode. This can be set in the range of
5–60 minutes. The default setting is 20 minutes.
The brightness of the display can be adjusted with the Display
Brightness slider.
In case of problems, the logging of the device can be exported
via this menu and sent to the manufacturer. To do this, connect a
USB stick to the side interface and execute the export via the
icon. The execution of the action will be acknowledged accord-
ingly in the display.
The System menu is opened by clicking on the icon
Clicking on the Information icon opens a window with informa-
tion about the device. Here you will find information about the
manufacturer, device model, serial number, firmware versions
and system ID. Have this information available when contacting
MACHEREY-NAGEL Technical Support.
Advance 1.0, 11.2020
®
.