tormek SVD-186 R Manuel D'instructions page 3

Gouge Jig SVD-186 R
For detailed instructions, please see the Tormek Handbook HB-10!
Design
The jig comprises a tool holder (1) which runs in a sleeve (2). The locking knob (3) locks
the rotary motion of the gouge jig. The tool is aligned with a disc (4) and tightened with a
screw (5). Easy and precise click setting (6). The stop ring (7) can be set with the screw (8)
in order to round off the heel of the grinding bevel. The setting can be noted on a special
recipe label (9), which is attached to the ferrule. PP-10 Profile Pen (10), which works on the
labels is included. For turning cutters there is a shaft (11) with a mounting screw (12) and a
2.5 mm allen key (13).
Turning Gouges and Carving Tools
You can grind turning gouges with the so called fingernail shape as well as carving gouges
with various shapes. You can also grind straight and curved V-tools.
The jig can be set from 0 to 6,
which permits the grinding of ...
... turning gouges with various
lengths of side bevels and ...
... carving gouges with various
shapes and V-tools.
EN
3