Publicité
Les langues disponibles
Les langues disponibles
MAXXUM AND RIPTIDE MAXXUM INSTALLATION
1
ITEM(S) NEEDED
B x 1
a. Note how the rope is routed through the Rope
Guide, around the Pins, and into the Eye Shaft.
The new cable will be routed in the same manner.
b. Remove the current rope.
c. Taking the new Cable and Handle (Item B) and
feed the Cable End Stop down through Rope
Guide Eyelet, and around the Lower Arm Pin.
2
ITEM(S) NEEDED
#10 x 1
d. Attach the Clevis (Item #8) onto the Cable by
sliding the clevis slot over the Cable and sliding
the Cable End Stop into the Clevis.
e. Attach the Clevis to the Eye shaft using the Clevis
Pin and Retaining Ring (Item #10).
©2016 Johnson Outdoors Marine Electronics, Inc.
#8 x 1
Rope Guide Eyelet
Cable End Stop
Eye Shaft
Cable
Lower Arm Pin
Clevis
Clevis Pin and
Retaining Ring
Eye Shaft
Lower Arm Pin
minnkotamotors.com | 6
Publicité
