UNMOUNTINg
1. Neck protective :
Pull the neck protective
; remove the support piece from the neck
protective by pulling the front (wind pro-
tection mask) toward outside, do the same
operation for the rear.
2.Cheeks :
Unmount the cheek pads of
their base by pulling to unclip the snaps
and separate the «Velcro»
3. Cap lining :
Unclip the snaps at the rear of
the cap. Unclip the front cap from its sup-
port by pulling backward. You can take off
the cap.
4. Belt protections :
covers are attached to the belt by a
Velcro, just pull the tab «removable bag»
of the belt toward outside of the helmet.
5. SharK race-r Pro
ear pad mounted by Velcro inside of the
cheeks at the ear level. These pieces are
removable to allow additional room on
the ears for audio system.
Attention :
When reassembling this item,
you need to reposition the toggle in the
passage of the belt.
textileS • textile PartS
DEMONTAgE - UNMOUNTINg
The protective
includes 2 pieces of
4
4
5
23