Table des Matières
Publicité
WARNINg : If you cannot obtain
a proper fit in accordance with
these instructions, do not uSe the
advice for uSe • conSeilS d'utiliSation
Advice for use
1/ PuttinG on the helmet
Once the chin strap is released, you have
to take hold of the two sections by the
buckles and hold them slightly apart to
facilitate the passage of your head. While
carrying out this movement, you are
10
helmet. Select a different helmet size
or model.
advised to keep the two sections of the
chin strap apart with your thumbs so that
they are properly positioned.
Position the protective parts of the chin
strap buckle correctly and fasten it in
accordance with the recommendations
that are appropriate to the versions and
country (see page 10-11).
Check that the tension and therefore the
positioning of the helmet are correct for
all positions. If this is not the case, you
must continue to adjust the length until
you achieve the ideal positioning.
2/ removinG the helmet
Release the chin strap ; hold the two
sections slightly apart as for putting the
helmet on and remove the helmet.
WARNINg: If you cannot properly
fasten your chin strap or obtain
the correct fit of your helmet on your
head, do not uSe the helmet! See
your retailer for assistance.
Publicité
Table des Matières
