Table des Matières
Publicité
chin StraP
The belt must correctly fit under the chin
to ensure the tight fitting of the helmet,
without discomfort or pain.
Warning :
never ride with the chin
strap loose or insufficiently tightened.
Even though the interior padding gi-
ves you the impression of being held,
your helmet risks coming off in a fall.
Never apply lubricating or acid products
or grease or solvents to the chin strap
buckle parts.
Your helmet Race-R Pro has a magnetic
clasp to easily fix the free stalk of the belt.
The magnetic receptacle is placed on the
protection of the belt, free stalk side, This
protection of belt is adjustable and remo-
vable (see textile chapter). It is recom-
mended to adjust, the position of the belt
protection before use. This adjustment is
controlled by means of «Velcro» (see pho-
tos). Very important, the magnetic clasp
chin StraP • JuGulaire
does not ensure maintaining of the hel-
met. It holds only the free stalk of the belt
For your safety, it is necessary to fasten.
Your belt by strictly following the instruc-
tions below : (see page 12-14).
11
Publicité
Table des Matières
