Setting The Temperature Unit - VOLTCRAFT UM5/1 200 Notice D'emploi

Settings mode is disabled and cannot be used when MIN/MAX/AVG mode is enabled.

Setting the temperature unit

1
• Select the temperature measurement option in SETUP mode. The "TEMP" symbol will appear.
• Press the
• Press the
current unit is indicated on the LCD display (7).
• Press the button (15) to confirm and save the setting.
Setting the light intensity unit
2
• Select the light intensity measurement option in SETUP mode. The "LIGHT" symbol will ap-
pear.
• Press the
• Press the
current unit is indicated on the LCD display (7).
• Press the button (15) to confirm and save the setting.
Setting the sound level unit
3
• Select the sound level measurement option in SETUP mode. The "SOUND" symbol will ap-
pear.
• Press the
• Press the
current unit is indicated on the LCD display (7).
• Press the button (15) to confirm and save the setting.
Setting the temperature offset
4
You can individually adjust the offset temperature for type K temperature measurements (also according to the tem-
perature sensor).
• Select the option for type K temperature measurements in SETUP mode. The "OFFSET" sym-
bol will appear.
• Press the
• The current offset value is shown in display A on the LCD display (7). The measured tempera-
ture with the added offset value is shown in display B on the LCD display.
• Press the button (15) to confirm and save the setting.
36
button (15) to display the current temperature unit.
(13) or (14) button to toggle the temperature unit between °C and °F. The
button (15) to display the current measurement unit.
(13) or (14) button to toggle the light intensity unit between LUX and FC. The
button (15) to display the current measurement unit.
(13) or (14) button to toggle the sound level unit between dBA and dBC. The
(13) or (14) button to set/change the offset value.