Instructions for use
•You can activate or deactivate the
cooker hood by operating the functions
shown in the diagram.
•Switch on the extractor fan a few minu-
tes before you start to cook in order to
ensure that a steady air flow has been
established before fumes appear.
•Allow the extractor fan to run for several
minutes after you have finished cooking
in order to expel all the grease from the
outlet duct. This prevents the return of
grease, smoke and smells.
Display
Timer
Decrease selected funtion
Increase selected funtion
Light
Program the working time
1) Switch on the cooker hood and choo-
se the required aspiration speed.
2) Push 'Timer'.
3) Select the required programming
time from 1 to 99 minutes by using the
buttons '+' and '-'.
4) The display will alternately show the
clock and the remaining programming
time.
The maximum speed 'H' can only be
selected manually and will be changed
automatically to the second speed level
after approximately 10 minutes.
Cleaning and maintenance
During cleaning and maintenance
work, make sure the safety instruc-
tions are complied with.
All manuals and user guides at all-guides.com
•If your kitchen hood is made of stainless
•If your kitchen hood is painted, use
•Never use metallic scourers, nor abrasi-
•Dry the kitchen hood using a cloth that
•Do not use vapour cleaners.
•To remove the filters from their fittings,
•The metal filters can be cleaned by soa-
•Cleaning in a dishwasher may dama-
•Once clean, leave them to dry off and
Proceed as follows:
•Unscrew the lamp cover.
•Change the broken / burnt out lamp.
•Screw the lamp cover back in.
Cleaning the hood body
steel, use proprietary cleaners mentio-
ned in the product instructions.
lukewarm water and a neutral soap.
ve or corrosive products.
does not produce fibres.
Cleaning the metal filters
press lightly on the locks and then pull
them off.
king them in hot water with neutral de-
tergent until the fat dissolves and then
rinsing them under the tap or using spe-
cial anti-grease products. They can also
be washed in a dishwasher. In this case,
it is advisable to stack them vertically to
avoid food residues to stick to them.
ge the metallic surface (blackening it),
although this will not affect its fat reten-
tion capacity.
then fit them onto the kitchen hood.
Changing light bulbs