Steam Generator Cleaning; Steam Generator Decalcification; Fragrance Dosage; Proper Use Of Steam Function - HOESCH SensePerience Instructions De Planification, De Montage Et D'utilisation

In order to remain entitled to repairs
under the guarantee and to keep the
shower panel looking good, you should
do the following: remove sediment and
impurities regularly from the screen.

04.03 Steam Generator Cleaning

The cleaning process is performed automatically after the steam bath and indicated by the ` - ´ symbol flashing in display
[W1]. The steam generator is emptied, filled and emptied again. The cleaning process takes 5.2 minutes. The steam
function is blocked during the cleaning process.
Bild 1

04.04 Steam Generator Decalcification

⚠
Don't open the filling door while enjoying a steam bath. For your
safety we recomment to wait at least 30 minutes after using a steam
3
bath till the cabine cools off.
[W1] + [W2] flash
- the steam generator has been operating for 18 working hours, the system needs
to be decalcified!
Symbol „00" flashes in display [W1]
- the steam generator has been operating for 20 working hours and the steam
function is blocked. The system needs to be decalcified
For decalcification, pour in 250ml of the liquid decalcifier (i. e. HOESCH special softening agent Art.Nr. 692101)
1
and activate the process by keeping button 5 pressed for 10 seconds.
The decalcification process can not be interrupted and is indicated by the symbol „00" appers in display [W1].
2
Decalcification process duration = 65 minutes

04.05 Fragrance dosage

Aromatic essences may only be added to the tank located on the steam nozzle.
Since scent extracts available in stores contain alcohol, only HOESCH scent
extracts may be used.
We will reject any claims on warranty if other scent extracts are used.
⚠
Be careful about direct skin contact near the steam outlet.
This can cause scalding!
05

Proper use of steam function!

First you take a shower and then use the steam bath. Before any steam bath,
you should take a shower, remove traces of soap and carefully wipe the whole body.
After getting the required temperature: enter the steam cabin and close the door carefully.
Please, avoid direct skin contact with the area of the steam outlet.
15 minutes is enough! First time use the steam bath only as long as you feel comfortable. We recommend maximum
15 minutes at 40 to 50°C. The best is taking a steam bath in the sitting position.
Steam bath duration should be controlled. You should never use more than 2-3 cycles of steam bath sequentially.
Steam is fragrant. The invigorating fragrances increase the refreshing effect and pleasure of the Roman steam bath.
To increase the steam bath effect, HOESCH fragrances can be added directly to the steam jet tank.
Alternating shower. At the end of each steam bath: cold shower. It has a refreshing effect. If you take warm shower, you
will be relaxed and muscle tension will reduce.
Relax. The best way is to lay down and relax this way relaxation effect and profitable steam bath effect for your body will
be strengthened.
Bild 2
4
Bild 3
5
6
7
GB
2
3
4
5
17