Beaba c1na37tpxps Notice D'utilisation page 8

• At the end of the self-cleaning cycle, the button
device beeps three times.
• Wait a few minutes for the device to cool in order to avoid the risk of burns.
• Empty the contents of the heating unit into a suitable receptacle using the
water distribution button.
• Open the lid and clean the interior of the heating unit with a clean and dry
cloth.
• Never touch the recipient directly after the water for a cleaning cycle has
been distributed. It may be very hot because the water for the clean mode
may reach 100°C. Always use an adapted cloth.
Never use water which has been used for the clean mode to
prepare feeding bottles.
ATTENTION ! Never open the heating lid unit during a self-cleaning
cycle. Always wait 5 minutes after a self-cleaning
cycle before starting a new cycle.
STERILISER/BOTTLE COMPARTMENT
• Clean the bottles with hot soapy water and rinse well before sterilising.
• To sterilise your bottles in the microwave, place the bottles and the
accessories in the steriliser/bottle compartment. It is able to hold up to 3
bottles depending on model and size.
• Fill the steriliser/bottle compartment with water up to the central mark
(about 200 ml of water).
• Place the steriliser in the middle of the microwave oven.
• Select the heating time (4 mins for a 900 W oven and 6 mins for a 750 W
to 800 W oven). Never exceed the recommended time.
• Once the sterilising cycle has ended, leave the steriliser to cool for 2
minutes in the microwave oven in order to avoid the risk of burns.
• As soon as the device has cooled enough, open the lid to let the steam out.
• Empty the steriliser/bottle compartment completely before repositioning it.
• To empty it, tilt it forwards gradually so that the water flows out of the two
holes designed for this purpose.
• Leave to dry or wipe with a clean cloth.
• Wash hands carefully with soapy water before removing the bottles and
accessories.
switches off and the
14
UPKEEP
• Always unplug the device before cleaning.
• Clean the tank and surfaces with a damp cloth or sponge.
• Dry carefully.
• Descale the heating tank periodically with (white) distilled vinegar: Pour
50 ml of water and 50 ml of (white) distilled vinegar into the device which
is cold and not plugged into the mains. Leave overnight and empty the
contents of the tank.
• Repeat if necessary until all the limescale has been removed. Plug the
device into the mains and operate two heating cycles with water only in
the tank (about 100 ml) in order to rinse well. Then, clean the inside of the
tank with a damp cloth.
• Never use a chemical descaler or a coffee machine descaler in the tank.
• Never soak the device in water.
• Check regularly that the heating unit is clean.
• After several cycles, a non-toxic white deposit (lime) may appear. If so,
complete a descaling cycle as above.
• Regular descaling is ESSENTIAL for the lifespan of your device.
The logo on this product featuring a crossed out wheelie
bin indicates that the product must not be disposed of with
your other household waste. In order to prevent damage
to the environment or human health, please separate
the product from other waste in order to ensure that it
is recycled in a manner that is safe for the environment.
For further information about existing collection sites,
please contact your local city office or the shop where you
purchased the product.
15