Rocal ARc LD Manuel Des Caracteristiques, Installation Et Fonctionnement page 19

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
6.2. Cleaning. It is important for the appliance to be clean of ash so that all mechanisms work properly. To clean the
body of the device use the cleaning dry cloth given with the appliance or similar. Do not use current cleaning
products.
5.2.1 Glass. You must turn the device off to clean the glass. The products used must not come into contact with the
metal parts of the door or the ceramic board; the aggressiveness of these products can cause a corrosion process of
the equipment.
6.2.2 Extraction of ashes. Extract the ashes only when the appliance is completely turned off, ensuring that the ashes
do not contain any burning coals; in which case you should deposit them in a metal bucket.
6.2.3. Flue liner. It is important to keep the flue liner clean. It gets dirty depending on the fuel used, on a slower or
faster combustion, etc. You need to clean the flue liner at least once per season. It is mandatory for a specialist to review
it periodically. To access the flue liner follow the steps shown in pictures "D.9", "D.10", "D.11" and "D.12" of the
ANNEXED document.
6.2.4. Painting. The heatproof paint that covers the inside and outside of the appliance withstands temperatures up to
600 °C and releases a subtle typical smell that disappears after the first few uses.
It is possible for the paint to jump out in some areas inside the housing after a period of use, due to corrosion caused
by liquids, inadequate fuel types or others not authorized by the manufacturer, etc., In that case it will be necessary to
repaint all damaged areas before a prolonged shutdown period. Use exclusively "Rocal heatproof spray paint".
7. OPTIONAL COMPLEMENTS
Rocal offers various optional items, contact your local dealer to purchase these items. Some of the items are shown
below:
Item
ECOntrol
Log store
Log store HABIT
BENCH
Ash vaccum cleaner
1 inlet diffuser
1 inlet narrow diffuser
2 inlets diffuser
2 inlet snarrow diffuser
3 inlets diffuser
4 inlets diffuser
1 exit diffuser
1 exit narrow diffuser
2 exits diffuser
2 exits narrow diffuser
3 exits diffuser
4 exits diffuser
Code
C7000
C1000
ASPIRADOR
D0001
D0002
D0006
D0007
D0011
D0016
D1001
D1002
D1006
D1007
D1011
D1016
Description
Intelligent combustion control
18

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Arc li

Table des Matières