Tripp-Lite U442-DOCK12-S Manuel De L'utilisateur page 5

Installation
Notes:
• When connected to power through the USB-C PD charging port, 5W is dedicated
to the docking station and connected USB peripherals. Remaining power is used to
charge the connected USB-C device.
• See Optional Accessories section for suggested cables.
1. Connect built-in USB-C cable to USB-C or Thunderbolt 3 port on your
laptop, tablet or other device.
2. Connect VGA port to VGA port on a monitor using a VGA cable.
3. Connect HDMI ports to HDMI ports on a monitor using HDMI cables.
4. Connect USB 3.0 hub port to a USB peripheral.
5. Charge device by connecting its USB-C charger to adapter's USB-C
PD charging port.
07-107-9337BD-BOOK.indb 5 07-107-9337BD-BOOK.indb 5
5
7/21/2021 9:53:26 A 7/21/2021 9:53:26 A