Publicité
STEP 4
Engage product slide
assembly to cabinet slide
assembly
(Fig 4).
Note: Before engaging
be sure to move the ball
bearing tracks found inside
the cabinet slide assembly
forward so they are flush
with the black mouth piece
caps.
STEP 5
Attach door to unit using (4) 6
x 1/2" flat head screws.
(See Figure 5).
Note: Utilize the adjustable
door mounting brackets to
ensure mounting in thick
portion of cabinet door
(front of product should line
up with front of face frame).
Use a 3/8" nut driver to
loosen and tighten the AMB
brackets.
The AMB brackets will
allow for side to side door
adjustment.
#2
7
3
32
64
2
mm
FIG. 4
FIG. 5
Door
3
8
INSTALLATION INSTRUCTIONS: 448 PULLOUT BASE ORGANIZERS
Adjustable Door
Mount Brackets
Lock Nut / T-Nut
3
Publicité
